This job was a big in every way! A big retaining wall needed to be built (5m high!).  It also had a big problem with zero drive on access!  The machine had to be craned in from street level as pictured. After the initial crane in, we had to excavate very carefully the existing slope and prepare the bottom layer in front of the house for the giant holes 600mm wide x 3.5m deep! The holes were done with the Dingo K9-4 and took 1 week to drill.  The 300 SED posts were then craned in and the Dingo then dragged each of these poles (1/2 tonne each!) into position. The … Continue reading Crane A Dingo